TYPE-C 6P Waterproof Connector
TYPE-C 6P waterproof connector is a 6-position USB Type-C receptacle option for sealed charging interfaces. Confirm the exact IP rating, pin assignment, mounting style, current rating and mating conditions against the selected manufacturer's drawing.
Your reliable partner for semiconductor solutions. Flychip supports customers from R&D to mass production with electronic component supply, BOM sourcing, PCB, SMT and PCBA services.
- 20+
- Years Component Supply
- BOM
- Multi-Part Sourcing
- PCBA
- PCB / SMT Support
- Part No.:
- TYPE-C 6P Waterproof Connector
- Manufacturer:
- CHINA
- Category:
- USB, DVI, HDMI Connector Assemblies
- Package:
- Datasheet:
-
-
- Description:
- TYPE-C 6P waterproof connector is a 6-position USB Type-C receptacle option for sealed charging interfaces. Confirm the exact IP rating, pin assignment, mounting style, current rating and mating conditions against the selected manufacturer's drawing.
- Quantity:
-
Quality Control
Supplier review, channel management and product verification before delivery.
-
Global Channels
International chip manufacturer and well-known distributor sourcing network.
-
BOM to Production
Component supply support from R&D prototype to mass production.
-
PCB / SMT / PCBA
Integrated manufacturing support to accelerate product development and delivery.
Product Details
TYPE-C 6P Waterproof ConnectorUSB-C Receptacle · Engineering & Procurement Review
Evaluate the six-position USB Type-C waterproof connector by its actual contact assignment, sealing construction, mounting geometry, current path, PCB footprint and manufacturer-specific test evidence before design-in or sourcing approval.
What Is a TYPE-C 6P Waterproof Connector?
A TYPE-C 6P waterproof connector is a six-position USB Type-C receptacle variant intended for a device interface where the connector opening and its installation need a defined water-ingress protection design. The "6P" description identifies a six-contact configuration; it does not, by itself, define the exact pin map, USB data capability, current rating, IP code, mounting style or mechanical dimensions.
Manufacturer catalogues show that six-position Type-C products can be offered as power-only or power-and-signal versions, and that waterproof variants may carry different IPX7 or IPX8 claims. For example, TE Connectivity lists 6P waterproof parts with different circuit applications and ratings. Therefore, a generic "TYPE-C 6P waterproof connector" name is a product-family description rather than a complete orderable part number.
This page is prepared as a generic engineering and procurement review because no manufacturer, full MPN or drawing was supplied. It deliberately does not assign a universal current, voltage, temperature, IP rating or footprint to the item. The exact manufacturer's drawing and specification must control those values.
- 6P
- Six-position contact configuration; verify the actual terminal assignment
- USB-C
- Type-C receptacle interface; data capability depends on populated contacts
- IPX?
- Ingress rating must be confirmed from the exact part and test condition
TYPE-C 6P Waterproof Connector Key Specifications
The following table separates what can be inferred from the product description from parameters that remain manufacturer-specific. Do not populate the unknown values with a generic market figure. TE, WITAC and other connector manufacturers publish different six-position constructions, dimensions and waterproof classifications.
| Parameter | Current Identification | Required Confirmation |
|---|---|---|
| Product Type | USB Type-C 6-position connector | Confirm receptacle or plug and exact series |
| Manufacturer | Not supplied | Manufacturer name and complete orderable MPN |
| Contact Count | 6 positions | Check drawing and terminal map |
| Circuit Application | Not defined by "6P" alone | Power-only, CC signaling or other supported circuit |
| Waterproof Rating | Not confirmed | Exact IP code, test standard, depth/time and mating state |
| Rated Current / Voltage | Not confirmed | Per-contact and total current, rated voltage and test conditions |
| Mounting Style | Not confirmed | Top mount, mid mount, vertical, SMT, DIP or hybrid |
| Dimensions / PCB Footprint | Not supplied | 2D drawing, 3D model, recommended land pattern and tolerances |
| Contact Material / Plating | Not confirmed | Base metal, plating material and thickness |
| Operating Temperature | Not confirmed | Manufacturer-rated range and derating conditions |
| Mating Durability | Not confirmed | Specified mating cycles and test method |
| Packing | Not confirmed | Tray, tube, tape-and-reel, bulk or customer packing |
Pinout, Charging and Electrical Design Check
Six-contact Type-C receptacles are often designed around VBUS, GND and the two configuration-channel contacts CC1 and CC2. One published six-contact waterproof connector drawing assigns A5 to CC1, A9 and B9 to VBUS, A12 and B12 to GND, and B5 to CC2. This is an example pin map only; it must not be treated as the pinout of an unidentified connector.
| Type-C Contact | Example Signal | Design Role |
|---|---|---|
| A5 | CC1 | Configuration channel; orientation and attach/current advertisement logic |
| B5 | CC2 | Configuration channel for the opposite plug orientation |
| A9 / B9 | VBUS | Power contacts; current sharing and routing depend on the connector drawing |
| A12 / B12 | GND | Ground return contacts; confirm PCB pad and shell bonding arrangement |
Six contacts do not automatically mean USB data support
A six-position implementation may be intended for charging or limited signaling. Do not assume that D+ and D− are present, and do not describe the connector as a full USB 2.0 data receptacle unless the exact contact arrangement and manufacturer documentation confirm the required data contacts. TE's catalogue separately identifies six-position power-only and power-and-signal variants, illustrating why the circuit application must be checked.
Confirm whether both CC contacts are brought out and how the sink/source role and current advertisement are implemented.
Check per-contact current limits, copper width, pad geometry, contact heating and any parallel-contact assumptions.
Verify the designated GND terminals and shell grounding strategy; do not assume the metal shell is the only return path.
Place suitable protection close to the connector and verify its capacitance and clamp behavior against the actual interface requirements.
For a released design, compare the connector's mating-face view with the PCB component-side drawing. A mirrored view or incorrect orientation can reverse CC1/CC2 and misplace power contacts.
Waterproof Rating, Sealing and Mechanical Design
Water-ingress performance is a property of the specified connector construction and its defined installation/test condition. It can depend on the gasket or O-ring, housing geometry, panel cutout, PCB position, shell retention, mating plug and enclosure assembly. A connector advertised as waterproof does not make the complete device waterproof automatically.
| Published Example | Manufacturer Description | What It Demonstrates |
|---|---|---|
| TE 2495154-1 | 6P waterproof DIP + SMT; IPX8; power application | One six-position construction with a stated IPX8 rating |
| TE 2495702-1 | 6P waterproof receptacle; IPX7; power application | Another 6P waterproof option with a different IP class |
| TE 2495703-1 | 6P waterproof receptacle; IPX7; power & signal application | Six-position variants can differ in circuit application |
| WITAC 99.W0026-6-TM1-W8 | 6P top-mount single-row SMT; IP67; CH 1.64 mm; body length 6.65 mm | Mounting and dimensional details are series-specific |
These are separately identified manufacturer examples, not specifications for the unidentified item listed on this page. IPX7, IPX8 and IP67 must not be treated as interchangeable. In particular, "X" means that a dust-protection digit is not stated in that IP code. Review the manufacturer's test definition, immersion conditions, plug-mated state and enclosure interface.
Request the actual IP test report or manufacturer specification for the complete part number. If the connector is mounted through an enclosure wall, validate the panel seal, fasteners, gasket compression and cable/plug interface as part of the finished product.
Mechanical fit is as important as the connector outline
Check the insertion opening, shell height, tongue position, board-edge clearance, locating pegs, shell stakes and solder tails. A connector with a similar front opening can still have a different central height, insertion depth or mounting footprint.
FLYCHIP Sourcing Review for Waterproof USB-C Connectors
For a generic connector description, sourcing quality begins by identifying the exact manufacturer and orderable code. The quotation should link the commercial line item to a controlled drawing revision, electrical specification and packing definition. A product photo alone is not sufficient to identify a connector family.
Part Identity
Confirm manufacturer, full MPN, revision, contact count, connector gender and any suffix that defines waterproof or mounting options.
Drawing Package
Request the 2D dimensional drawing, PCB layout, mating interface details and 3D CAD model where available.
Electrical Evidence
Obtain rated current, voltage, contact resistance, insulation resistance, dielectric withstand and test conditions.
Ingress Evidence
Request the exact IP classification, test report or manufacturer statement and the defined mated/unmated condition.
Where multiple suppliers offer visually similar 6P parts, keep each source as a separate candidate until mechanical, electrical and sealing evidence has been compared. Avoid combining one supplier's drawing with another supplier's test values.
Quality Review Before Quotation and Shipment
Incoming inspection should be based on the approved drawing and quality plan, not a generic visual description. For waterproof connectors, appearance, terminal position and sealing components can affect both electrical continuity and ingress performance.
| Inspection Area | What to Verify | Evidence / Method |
|---|---|---|
| Marking & Identity | Manufacturer, MPN, lot/date code and packaging label | Label, certificate and purchase record cross-check |
| Housing & Shell | Cracks, deformation, plating damage, burrs and corrosion | Visual inspection against approved sample/drawing |
| Contacts | Count, alignment, coplanarity, plating and contamination | Magnified inspection and dimensional sampling |
| Electrical Continuity | Correct pin mapping and contact resistance | Continuity and resistance test under defined conditions |
| Insulation | Insulation resistance and dielectric withstand | Manufacturer limits and approved test procedure |
| Mechanical | Mating force, retention and durability | Specified gauges, fixtures and cycle test |
| Waterproofing | Seal presence, gasket condition and ingress performance | Manufacturer test evidence or approved finished-assembly test |
| Packing | Terminal protection, reel/tray condition and traceability | Incoming packaging inspection and lot record |
Do not perform an arbitrary water test on every incoming lot if the method, pressure, duration or sample handling is undefined. Use the manufacturer's qualification method or a customer-approved validation plan so the test itself does not damage otherwise acceptable parts.
BOM Support and Cross-Functional Design Review
A useful BOM line for a waterproof Type-C connector should include more than "USB-C 6P waterproof". It should identify the exact connector, mounting style and required sealing performance so purchasing, PCB design, mechanical design and production use the same definition.
| BOM Attribute | Recommended Entry | Why It Matters |
|---|---|---|
| Manufacturer / MPN | Exact manufacturer and complete orderable part number | Prevents visually similar but mechanically different substitutions |
| Pin Configuration | 6P with controlled pin assignment drawing | Defines VBUS, GND, CC and any supported signal contacts |
| Mounting / Orientation | Top, mid, vertical, right-angle, SMT, DIP or hybrid | Controls footprint, board edge and assembly process |
| IP Requirement | Exact IP code and application test condition | Connects component selection to enclosure protection |
| Electrical Limits | Current, voltage, resistance and temperature limits | Supports power budget and reliability calculations |
| Mechanical Drawing | Drawing number, revision and 3D CAD reference | Controls fit and change management |
| Approved Alternate | Qualified alternate MPN or "no substitution" | Prevents unreviewed sourcing changes |
For an existing design, retain the original connector drawing and board revision with the BOM. If a replacement is proposed, compare the complete footprint, pin map, shell stakes, seal geometry and insertion depth before approving a purchase substitution.
Procurement Risk: IP Rating, Pin Count and Drop-In Replacement
The most common sourcing risk is treating "Type-C 6P waterproof" as a unique specification. In practice, six-position products can differ in circuit application, mounting method, waterproof classification, central height, body length, terminal arrangement and rated current. A model name or product photograph cannot close these differences.
| Replacement Check | Required Comparison | Approval Status |
|---|---|---|
| Contact Assignment | VBUS, GND, CC1, CC2 and any other populated contacts | Must match circuit and orientation |
| Data Capability | Power-only vs power-and-signal; D+/D− presence if needed | Must meet interface requirement |
| IP Classification | IPX7, IPX8, IP67 or other stated code and test conditions | Must meet system requirement; not inferred |
| Current / Voltage | Per-contact rating, total rating, temperature rise and voltage | Requires electrical and thermal review |
| Footprint | Terminal positions, shell stakes, locating pegs and board edge | Requires drawing overlay and PCB review |
| Sealing Geometry | Gasket, O-ring, panel interface and mating plug condition | Requires enclosure-level validation |
| Mechanical Life | Mating cycles, insertion/extraction force and retention | Must meet application life requirement |
Do not approve an alternate only because it has six contacts and a Type-C opening. A footprint mismatch or a different sealing construction can cause assembly failure or loss of the required ingress protection.
For an IP-rated end product, the connector component rating is only one part of the protection system. Validate the assembled enclosure, panel cutout, fasteners, gasket compression, cable/plug and production process under the product's actual test conditions.
Supply Chain and Order Review
Connector packing and order multiples vary by manufacturer and series. Do not assume that all six-position waterproof Type-C connectors are supplied on tape-and-reel or share the same reel quantity. Confirm the exact packing option against the quotation and manufacturer packaging drawing.
| Purchase Item | Recommended Confirmation | Evidence to Retain |
|---|---|---|
| Exact Material | Manufacturer, full MPN and current drawing revision | Approved BOM and supplier quotation |
| Packing Format | Tray, tube, bulk, tape-and-reel and reel quantity | Packaging specification and shipment label |
| Lot / Date Code | Lot traceability, date-code policy and mixed-lot rules | Label records and agreed acceptance conditions |
| Compliance | RoHS, REACH, halogen or customer-specific declarations | Current manufacturer declarations |
| Quality Evidence | Inspection report, material certificate or test report as required | Lot-linked documents where available |
| Stock / Lead Time | Actual available quantity, delivery date and quote validity | Dated quotation and order confirmation |
Stock, origin, authorized-channel status, lead time and pricing are transaction-specific and are not asserted on this generic product page. Ask the supplier to identify the actual material offered and to disclose any alternate MPN before order placement.
PCB, SMT and PCBA Coordination
Waterproof Type-C connectors may combine SMT signal/power terminals with through-hole shell stakes or locating posts. The exact arrangement is series-specific. A footprint copied from a visually similar connector can create solder-joint, alignment, shell-retention or sealing problems.
Footprint and Board Edge
Use the approved manufacturer's PCB layout. Check connector insertion depth, board-edge distance, central height, locating pegs and shell stakes.
SMT / DIP Process
Confirm whether the part is SMT-only or hybrid DIP+SMT. Match paste apertures, soldering sequence and process limits to the manufacturer's recommendations.
Waterproof Seal
Protect the gasket or O-ring during placement and enclosure assembly. Verify compression, panel contact and the specified mating condition.
Electrical Inspection
Check contact continuity, pin mapping, shell grounding, solder quality and any required resistance or dielectric tests.
For production, define the inspection view and orientation so that CC1/CC2 and VBUS/GND are not confused. If waterproof performance is required, include a finished-assembly validation step rather than relying only on an unmounted connector's catalogue statement.
Recommended Purchase Decision and RFQ Flow
Approve the connector against the electrical, mechanical and ingress requirements before choosing a source. If the exact part number is not yet fixed, request drawings and samples from candidate manufacturers and compare them in a controlled engineering review.
Suggested RFQ wording: "USB Type-C 6-position waterproof receptacle. Please provide manufacturer and full orderable part number, 2D drawing, PCB layout, 3D CAD, pin assignment, rated current and voltage, contact resistance, operating temperature, mating-cycle rating, exact IP classification and test condition, packing format, MOQ, available quantity and lead time. Identify all proposed alternatives separately."
If the application requires USB data, specify the required USB generation and signal contacts. If it is charging-only, specify the expected source/sink role, CC implementation and power-current requirement. If it is an outdoor or washdown product, define the enclosure-level ingress requirement and test state.
TYPE-C 6P Waterproof Connector Product FAQ
These answers explain the product-family terminology. The exact connector drawing and manufacturer's specification remain the authority for a particular orderable part.
What does TYPE-C 6P mean?
Does every 6P Type-C connector support USB data?
Is every TYPE-C 6P waterproof connector IPX8?
Are IPX7 and IPX8 interchangeable?
What are the typical six contacts used for?
Can I assume a 5A current rating?
Can I replace one 6P waterproof connector with another?
Does the connector alone make the device waterproof?
What documents should be requested before ordering?
Can the generic name be used as the full BOM part number?
Technical Sources and Review Basis
Review date: November 17, 2026. This page describes a generic TYPE-C 6P waterproof connector family because no manufacturer or complete MPN was provided. The cited manufacturer examples demonstrate that six-position Type-C connectors can differ in circuit application, IP classification, mounting and dimensions. They are not interchangeable specifications for the generic item.
- TE Connectivity, USB Type-C Connectors catalogue - lists 6-position waterproof variants including IPX7/IPX8 and distinguishes power-only from power-and-signal circuit applications.
- WITAC 99.W0026-6-TM1-W8 product page - manufacturer-specific example of a top-mount, single-row SMT, six-contact connector with stated IP67 classification and dimensions.
- HYCW245-USBC06-080B waterproof USB Type-C 6P drawing - example six-contact assignment, materials and electrical/mechanical notes for one specific connector.
- TE Connectivity 2495702-1 product document - manufacturer-specific product identification for a 6P waterproof IPX7 Type-C receptacle.
- TACLEX XL-ATCF-06-006 product page - example of a separately specified IPX8 SMT Type-C 6P waterproof female connector.
No manufacturer identity, exact IP rating, rated current, rated voltage, dimensional drawing, stock status, country of origin, authorized-channel status or sample-test result is asserted for the unspecified product. Confirm the current manufacturer documentation and offered lot before design release or purchase.
From Component Sourcing to Production Delivery
Flychip has been providing electronic components to global customers for 20 years. We combine component supply, BOM services, PCB, SMT and PCBA support to help customers accelerate product development and delivery.
-
R&D Support
Fast sourcing support for prototype development, sample validation and early-stage engineering needs.
-
BOM Services
Multi-line BOM matching with component supply, alternative suggestions and procurement follow-up.
-
Mass Production
Stable supply coordination for production preparation, batch delivery and long-term purchasing needs.
-
Experienced Team
Over 15 years of channel management, quality control, sales management and organization management experience.
TYPE-C 6P Waterproof Connector Technical Information
- Specifications
- FAQ
- Hot Sale
- Related Products
Specifications
- Product Attributes
- Attribute Value
- Manufacturer:
- CHINA
- Series:
- TYPE-C 6P Waterproof Series
- Packaging:
- Tape & Reel (T&R) - Confirm Packaging
- Product Status:
- Active (Subject to Supplier Confirmation)
- Connector Type:
- USB Type-C Receptacle
- Number of Contacts:
- 6
- Gender:
- Female (Receptacle)
- Specifications:
- USB Type-C 6-Position Connector; Power / Signal Configuration Depends on Model
- Mounting Type:
- Surface Mount (SMT) / Through-Hole (DIP) - Model Dependent
- Mounting Feature:
- Top Mount / Mid Mount / Flush Mount - Model Dependent
- Termination:
- SMT Terminals with Through-Hole Shell Stakes (Model Dependent)
- Features:
- Waterproof Design, USB Type-C Interface, Reversible Mating, Compact Structure
- Ingress Protection:
- IP Rating Model Dependent - Verify IPX6 / IPX7 / IPX8
- Operating Temperature:
- Not Specified - Refer to Manufacturer Datasheet
- Number of Ports:
- 1
- Current Rating (Amps):
- Not Specified - Confirm VBUS Current Rating
- Voltage - Rated:
- Not Specified - Confirm Manufacturer Rating
- Mating Cycles:
- Not Specified - Confirm Manufacturer Datasheet
- Shielding:
- Metal Shell Shielding (Subject to Product Construction)
FAQ
1. How to order TYPE-C 6P Waterproof Connector on Flychip?
You can submit an RFQ directly on this page. Our sales team will review your quantity, delivery requirements and target price, then reply with a quotation as soon as possible.
2. How does Flychip verify the quality of TYPE-C 6P Waterproof Connector?
We work with qualified channels including international chip manufacturers and well-known distributors. Our team pays close attention to supplier review, traceability, product condition and quality control.
3. Are the price and inventory of TYPE-C 6P Waterproof Connector updated in real time?
Inventory and prices of electronic components may fluctuate frequently. The displayed data is for reference, and the final quotation will be confirmed by our sales team.
4. What payment methods are accepted?
Wire Transfer, PayPal, Alipay, WeChat, Credit Card, Western Union, MoneyGram and Escrow may be supported depending on the order and region.
5. How is shipping arranged?
We can arrange international shipping through DHL, UPS, FedEx, TNT and other logistics channels. Tracking information will be provided after shipment.
6. What is the return or replacement process for TYPE-C 6P Waterproof Connector?
Please contact our sales team within the specified period if there are quantity differences, wrong items, or clear external defects. The product should remain unused and in its original packaging.
7. Can I request technical support for TYPE-C 6P Waterproof Connector?
Yes. You can contact us for datasheet, package details, pin information and sourcing assistance related to TYPE-C 6P Waterproof Connector.
Hot Sale
Related Products
-
-
10118192-0002LF
Amphenol ICC (FCI)
-
-
10118193-0001LF
Amphenol ICC (FCI)
-
-
10118194-0001LF
Amphenol ICC (FCI)
-
-
10118192-0001LF
Amphenol ICC (FCI)
-
-
10164359-00011LF
Amphenol ICC (FCI)
-
-
USB-A1HSB6
On Shore Technology Inc.
-
-
UJ2-BH-1-TH
Same Sky (Formerly CUI Devices)
-
-
690-005-299-043
EDAC Inc.
-
-
12402012E212A
Amphenol ICC (Commercial Products)
-
-
USB-B1HSW6
On Shore Technology Inc.
-
-
UP2-AH-1-TH
Same Sky (Formerly CUI Devices)
TYPE-C 6P Waterproof Connector Sourcing & Technical Support
TYPE-C 6P Waterproof Connector is supplied by CHINA. This page provides key purchasing information including manufacturer, package, datasheet, stock reference, price reference and RFQ support.
As your reliable partner for semiconductor solutions, Flychip supports customers from research and development to mass production with electronic component supply, BOM sourcing, PCB, SMT and PCBA solutions.
Our sourcing partners include international chip manufacturers and well-known distributors. With rich experience in channel management, quality control and sales management, Flychip helps customers accelerate product development and delivery.
- Part Number
- TYPE-C 6P Waterproof Connector
- Manufacturer
- CHINA
- Package
- Category
- USB, DVI, HDMI Connector Assemblies
Quick RFQ Send your inquiry and our sales team will respond quickly.
Tips
Please check your information and try again.