CHINA

2864273 MINI MCR-SL-PT100-UI-NC

2864273 MINI MCR-SL-PT100-UI-NC is a Phoenix Contact MINI Analog Pt100 temperature transmitter with 3-way isolation, 2/3/4-wire RTD input, configurable current/voltage output and 19.2–30VDC supply.

Flychip Semiconductor Solutions 20 Years

Your reliable partner for semiconductor solutions. Flychip supports customers from R&D to mass production with electronic component supply, BOM sourcing, PCB, SMT and PCBA services.

20+
Years Component Supply
BOM
Multi-Part Sourcing
PCBA
PCB / SMT Support
Part No.:
2864273 MINI MCR-SL-PT100-UI-NC
Manufacturer:
CHINA
Category:
Sensor, Transducer Amplifiers
Package:
Datasheet:

-

Description:
2864273 MINI MCR-SL-PT100-UI-NC is a Phoenix Contact MINI Analog Pt100 temperature transmitter with 3-way isolation, 2/3/4-wire RTD input, configurable current/voltage output and 19.2–30VDC supply.
Quantity:
Quality Control

Supplier review, channel management and product verification before delivery.

Global Channels

International chip manufacturer and well-known distributor sourcing network.

BOM to Production

Component supply support from R&D prototype to mass production.

PCB / SMT / PCBA

Integrated manufacturing support to accelerate product development and delivery.

Product Details

FLYCHIP Product Review
2864273 MINI MCR-SL-PT100-UI-NC Engineering Review

Engineering and procurement review of the Phoenix Contact 2864273 MINI MCR-SL-PT100-UI-NC configurable Pt100 temperature transmitter, covering 2-, 3- and 4-wire RTD input, current and voltage output selection, three-way isolation, DIP-switch configuration, DIN-rail installation and industrial sourcing control.

Sensor Input Pt100 · 2 / 3 / 4 Wire
Analog Output Current or Voltage
Module Width 6.2 mm MINI Analog
-150…850°C
Configurable Pt100 measurement range
3-Way
Input / output / supply isolation architecture
24 VDC
19.2–30 VDC operating supply range
≤0.2%
Transmission error across full measuring range
01

2864273 MINI MCR-SL-PT100-UI-NC Product Details

2864273 MINI MCR-SL-PT100-UI-NC is a Phoenix Contact MINI Analog temperature transmitter designed for Pt100 resistance temperature detectors in industrial control systems. The module converts a Pt100 resistance-temperature signal into an electrically isolated standard current or voltage signal for PLC, DCS and other analog-input equipment.

With a housing width of only 6.2 mm, the module is suited to control cabinets where DIN-rail density matters. Configuration is performed by DIP switches on the side of the housing.

Parameter 2864273 Engineering Relevance
Manufacturer Phoenix Contact Manufacturer identity should remain controlled in the project BOM.
Order Number 2864273 Primary Phoenix Contact commercial article number.
Product Name MINI MCR-SL-PT100-UI-NC Identifies the Pt100, universal-output, unconfigured version.
Product Family MINI Analog 6.2 mm industrial signal-conditioning family.
Product Type Temperature transmitter Converts RTD temperature measurement into standard analog signals.
Input Channels 1 One Pt100 measuring channel per module.
Sensor Pt100 according to IEC / EN 60751 Sensor characteristic must correspond to the configured RTD type.
Connection Technology 2-, 3- or 4-wire Pt100 Selection affects lead-resistance compensation and measurement accuracy.
Temperature Range -150°C to +850°C configurable Actual measurement span is selected with DIP-switch configuration.
Minimum Measurement Span 50 K Very narrow requested ranges should be checked against the minimum span.
Sensor Input Current 1 mA constant Excitation current used for Pt100 resistance measurement.
Electrical Isolation 3-way isolation Separates input, analog output and power-supply domains.
Nominal Supply 24 VDC Standard industrial-control supply voltage.
Supply Range 19.2 VDC to 30 VDC PLC-panel power rail must remain within the specified range.
Configuration DIP switches Used to define wiring mode, range, output and fault response.
Connection Screw connection Important distinction from spring-cage / push-in variants.
Width 6.2 mm Supports high-density DIN-rail layouts.
Dimensions 6.2 × 93.1 × 101.2 mm Width × height × depth reference for cabinet layout.
Protection Rating IP20 Intended for protected industrial enclosure installation.
Engineering evidence boundary

Product parameters should be validated against the current Phoenix Contact documentation for article 2864273. System accuracy also depends on the Pt100 sensor, connection method, conductor resistance, PLC/DCS input characteristics and field installation.

02

Pt100-to-PLC Signal Architecture

The module performs more than simple resistance conversion. It conditions the Pt100 measurement, isolates the sensor circuit from the control-system side, and scales temperature into a standard industrial analog signal.

Pt100 Sensor 2 / 3 / 4 conductor
→
2864273 Measure · Isolate · Convert
→
PLC / DCS Current or voltage input
Sensor Pt100 Resistance Measurement

Accepts IEC 60751 Pt100 RTD measurement rather than a voltage or thermocouple input.

Isolation 3-Way Separation

Input, output and supply are galvanically isolated.

Scaling Configurable Range

A selected temperature span is scaled into the required analog signal.

Control PLC / DCS Interface

Standard current and voltage signals simplify industrial controller integration.

03

2-Wire, 3-Wire and 4-Wire Pt100 Engineering

The number of Pt100 conductors is an engineering parameter, not merely a wiring preference. Lead-wire resistance becomes part of the measured resistance unless the connection architecture compensates for it.

Pt100 Wiring Engineering Characteristic Typical Selection Logic
2-Wire Sensor and lead resistance are measured together. Best suited where cable resistance is sufficiently small for the required system accuracy.
3-Wire Allows compensation when lead resistances are reasonably matched. Common industrial compromise between accuracy and cabling cost.
4-Wire Provides the strongest compensation for lead-wire resistance. Useful for longer cable runs or higher-accuracy applications.
Maximum Conductor Resistance 10 Ω per cable Field wiring should remain within the manufacturer's input limitation.
Sensor Standard Pt100 IEC / EN 60751 Confirm the field sensor follows the expected Pt100 characteristic.
A 4-wire transmitter does not automatically make the complete system highly accurate

Final temperature uncertainty includes sensor class, mounting error, thermal gradients, transmitter accuracy, conductor effects and the PLC/DCS analog-input accuracy. Review the complete measurement chain rather than one component.

04

Current and Voltage Output Selection

The "UI" portion of the product family reflects the module's flexible analog-output capability. The output type and range must be matched to the receiving PLC, DCS, recorder or analog acquisition system.

Output Option Available Configuration Application Note
Current Output 0–20 mA Standard industrial current transmission option.
Current Output 4–20 mA Common process-control signal with live-zero capability.
Reverse Current Output 20–0 mA / 20–4 mA Allows inverted temperature-to-current transfer characteristic where needed.
Voltage Output 0–10 V Common PLC voltage-input range.
Voltage Output 0–5 V / 1–5 V Alternative analog voltage ranges.
Reverse Voltage Output 10–0 V Supports inverted output scaling.
Current Output Load < 500 Ω at 20 mA Receiving loop impedance must remain within output capability.
Voltage Output Load ≥ 10 kΩ Prevents excessive output loading.
4–20 mA is often preferable for longer industrial signal paths

Current transmission is generally less sensitive to voltage drop along the signal cable than voltage-mode measurement. The final choice should still match the available controller input and plant grounding architecture.

05

Accuracy, Response Time and Electrical Isolation

Performance Item Manufacturer Specification Engineering Interpretation
Full-Range Transmission Error ≤ 0.2% Transmitter-level performance; sensor error remains separate.
Set-Range Transmission Error ((100 K / configured span [K]) + 0.1)% Narrow spans can increase the percentage contribution of the transmitter error.
Temperature Coefficient < 0.02%/K Relevant where control-cabinet ambient temperature varies.
Step Response 0–99% < 160 ms Transmitter response is usually much faster than many physical Pt100 probe thermal time constants.
Isolation Architecture 3-way Separates sensor, output and supply-side electrical potentials.
Rated Insulation Voltage 50 V AC/DC Must not be confused with the higher dielectric test voltage.
Test Voltage 1.5 kV AC, 50 Hz, 60 s Dielectric test condition, not continuous working voltage.
1.5 kV test voltage is not a 1.5 kV operating-voltage rating

Dielectric test voltage and rated insulation voltage are different specifications. Industrial isolation selection should follow the manufacturer's IEC/EN 61010 insulation data and the actual system voltage category.

06

24 VDC Power and DIN-Rail Integration

MINI MCR-SL-PT100-UI-NC can receive power through its connection terminals or through the Phoenix Contact MINI Analog DIN-rail bus system. This can simplify cabinet wiring when several signal conditioners are installed side by side.

Installation Parameter 2864273 Engineering Check
Nominal Supply 24 VDC Standard control-panel supply.
Operating Supply Range 19.2–30 VDC Include supply tolerance and worst-case panel voltage.
Max. Current Consumption < 21 mA at approx. 24 VDC Useful for sizing shared 24 VDC power supplies.
Power Consumption < 500 mW Relevant for dense control-cabinet thermal calculations.
DIN Rail 35 mm DIN rail, EN 60715 system Verify mechanical rail standard and panel clearance.
Optional DIN-Rail Connector ME 6,2 TBUS-2 1,5/5-ST-3,81 GN / article 2869728 Can bridge supply power across compatible MINI Analog modules.
07

Industrial Environment, Wiring and EMC Review

Environmental Item Specification Design Meaning
Operating Temperature -20°C to +65°C Cabinet ambient must remain within this operating range.
Storage / Transport -40°C to +85°C Relevant to warehouse and transport conditions.
Humidity 5% to 95%, non-condensing Condensation should be prevented.
Protection IP20 Designed for installation inside a suitable control enclosure.
Altitude ≤ 2000 m Higher-altitude applications require separate review.
EMC Industrial Class A product Installation should follow industrial EMC grounding, routing and shielding practice.
Wire Size 0.2–2.5 mm² / AWG 26–12 Applies to the screw-connection terminal specification.
Strip Length 12 mm Correct preparation supports reliable screw-terminal connection.
08

What the NC Version Means for Commissioning

2864273 is the NC, or unconfigured, version. It is therefore important not to treat its output range as factory-defined unless the supplied unit has already been commissioned by the system integrator.

1
Wiring Mode

Select 2-, 3- or 4-wire Pt100 input.

2
Temperature Span

Define measurement start and end values.

3
Output Signal

Choose current or voltage range.

4
Error Evaluation

Configure the required fault behavior.

NC version commissioning risk

On an unconfigured unit with the relevant DIP switches left in the initial zero positions, the module does not have a defined measurement function until configuration is completed. Commissioning records should therefore document the selected DIP-switch configuration.

Related Version Article Number Key Difference
MINI MCR-SL-PT100-UI-NC 2864273 Screw connection, supplied unconfigured.
MINI MCR-SL-PT100-UI 2864435 Related screw-terminal version available with ordering configuration.
09

Quality Review Before Quotation

Industrial signal-conditioning products should be purchased against the exact Phoenix Contact article number, not only the family description. Connection type, configuration state and related MINI Analog suffixes can change the product delivered to the panel builder.

Identity Article Number

Confirm Phoenix Contact 2864273 and MINI MCR-SL-PT100-UI-NC on the product and packaging documentation.

Version NC Configuration

Verify that an unconfigured NC version is actually required by the project.

Terminal Screw Connection

Check against spring-cage or other related MINI Analog variants.

Traceability Label and Packaging

Review manufacturer label, article number, quantity and sourcing documentation.

Commercial Data Current Manufacturer Reference Procurement Use
Article Number 2864273 Exact purchasing identifier.
GTIN 4017918956561 Additional manufacturer catalog identity reference.
Packing Unit 1 piece Useful for procurement-unit control.
Minimum Order Quantity 1 piece Current manufacturer sales-data reference.
Sales Note Made to order / non-returnable Check configuration and project requirement carefully before ordering.
Made-to-order status increases the cost of a specification mistake

Because the current Phoenix Contact catalog identifies the item as made to order and non-returnable, buyers should confirm the NC configuration, screw connection, Pt100 requirement and analog-output needs before final purchase approval.

10

BOM Support and Replacement Strategy

A replacement for 2864273 should not be approved merely because it accepts Pt100 and produces 4–20 mA. Mechanical, isolation, range, configuration and control-panel requirements also need comparison.

Replacement Criterion What Must Be Compared Risk if Ignored
Sensor Type IEC 60751 Pt100 Different RTD or thermocouple input characteristic.
Wiring Method 2 / 3 / 4-wire support Existing field wiring may become incompatible.
Temperature Range -150°C to +850°C capability Replacement may not support required measurement span.
Output Signals Required mA / V ranges and inverse outputs PLC analog channel may not match.
Isolation 3-way isolation Ground-loop and system-isolation behavior can change.
Supply 19.2–30 VDC Control-panel supply may be outside alternate limits.
Module Width 6.2 mm Wider alternatives can reduce DIN-rail cabinet capacity.
Terminal Technology Screw connection Wiring practice or approved panel design may change.
Configuration State NC / unconfigured Replacement commissioning procedure may differ.
11

2864273 Procurement Risk Points

Risk Point Recommended Verification Why It Matters
Family-Name Purchase Order against article 2864273. MINI Analog contains multiple Pt100 and connection variants.
NC Suffix Confirm project wants the unconfigured version. The module must be configured before defined operation.
Screw vs Spring Connection Confirm screw-terminal variant. Related part numbers can use different terminal technology.
4–20 mA Assumption Record actual output configuration. 2864273 supports several current and voltage output modes.
Pt100 vs Other Sensor Confirm field sensor type. A thermocouple requires a different transmitter architecture.
Made-to-Order Item Recheck specification before PO release. Manufacturer catalog indicates the item is non-returnable.
EEAT evidence separation

Specifications such as 19.2–30 VDC supply, -150°C to +850°C Pt100 range and 3-way isolation are manufacturer-controlled product characteristics. Whether a specific unit has already been DIP-configured, stored correctly or comes from a traceable channel is shipment-specific information requiring separate supplier evidence.

12

Recommended Purchase Decision Flow

The safest selection process begins with the field sensor and PLC requirements rather than starting from price or availability.

Pt100 Check → 2 / 3 / 4-Wire Check → Temperature Span → mA / V Output → 24 VDC / Isolation → NC Configuration → Order Approval
Decision Recommendation
Select 2864273 when The system uses an IEC 60751 Pt100 sensor and requires configurable isolated current/voltage output in a 6.2 mm DIN-rail module.
Recheck the application when Very narrow temperature spans, high accuracy targets, long sensor cabling or unusual grounding conditions are present.
Choose another transmitter when The sensor is a thermocouple, Pt1000, thermistor or another unsupported measurement technology.
Do not commission until Wiring technology, temperature range, analog output and error behavior have been correctly configured with the DIP switches.
13

2864273 MINI MCR-SL-PT100-UI-NC FAQ

What is Phoenix Contact 2864273?
Phoenix Contact 2864273 is the MINI MCR-SL-PT100-UI-NC, a configurable 6.2 mm Pt100 temperature transmitter with three-way electrical isolation and current or voltage analog output.
What sensor works with MINI MCR-SL-PT100-UI-NC?
It is designed for Pt100 resistance temperature detectors in accordance with IEC / EN 60751.
Does 2864273 support 2-wire, 3-wire and 4-wire Pt100?
Yes. The module supports 2-, 3- and 4-conductor Pt100 connection methods.
What temperature range can 2864273 measure?
The Phoenix Contact specification lists a configurable Pt100 temperature range from -150°C to +850°C with a minimum measurement span of 50 K.
Can 2864273 output 4-20mA?
Yes. Available current-output selections include 0–20 mA, 4–20 mA, 20–0 mA and 20–4 mA.
Can MINI MCR-SL-PT100-UI-NC output 0-10V?
Yes. Voltage-output configurations include 0–5 V, 1–5 V, 0–10 V and 10–0 V.
What does NC mean in MINI MCR-SL-PT100-UI-NC?
The NC version is supplied without a predefined operating configuration. The required connection mode, measuring range, output and error evaluation must be set before defined operation.
What power supply does Phoenix Contact 2864273 require?
Its nominal supply voltage is 24 VDC, with a specified operating range of 19.2 VDC to 30 VDC.
Is 2864273 electrically isolated?
Yes. Phoenix Contact specifies three-way electrical isolation between the measurement, output and supply functions.
How wide is MINI MCR-SL-PT100-UI-NC?
The module is only 6.2 mm wide. Its published dimensions are approximately 6.2 mm wide, 93.1 mm high and 101.2 mm deep.
Is 2864273 suitable for DIN-rail installation?
Yes. It is part of the MINI Analog industrial DIN-rail platform and can also use the compatible DIN-rail bus connector for power distribution.
What should be checked before replacing 2864273?
Confirm Pt100 compatibility, 2/3/4-wire support, temperature range, current or voltage output, supply range, three-way isolation, 6.2 mm size, terminal type and configuration method.
14

Engineering Evidence and Review Notice

This review is intended to support component identification, preliminary control-system engineering, panel design, sourcing evaluation, replacement review and procurement of Phoenix Contact article 2864273.

Phoenix Contact manufacturer documentation should remain the primary technical source for input characteristics, measuring ranges, output signals, electrical isolation, supply limits, dimensions, environmental ratings and configuration.

Evidence Area Preferred Source Purpose
Product Identification Phoenix Contact article 2864273 product documentation Verify exact model and NC configuration.
Pt100 Input Current Phoenix Contact technical data Verify sensor type, wiring mode, range and conductor resistance.
Analog Output Manufacturer output data Verify mA / V range and permissible output loading.
Isolation / Accuracy Manufacturer electrical characteristics Verify system measurement and isolation requirements.
Sales Configuration Current Phoenix Contact commercial catalog Confirm article number, packing unit and ordering notes.
Shipment Condition Actual supplier documentation and incoming inspection Verify sourcing, label, condition and traceability.
Primary engineering reference basis: Phoenix Contact product and technical documentation for article 2864273 MINI MCR-SL-PT100-UI-NC. Manufacturer documentation may be updated; final production and commissioning approval should use the current controlled documentation for the purchased article.
Flychip Advantage

From Component Sourcing to Production Delivery

Flychip has been providing electronic components to global customers for 20 years. We combine component supply, BOM services, PCB, SMT and PCBA support to help customers accelerate product development and delivery.

R&D Support

Fast sourcing support for prototype development, sample validation and early-stage engineering needs.

BOM Services

Multi-line BOM matching with component supply, alternative suggestions and procurement follow-up.

Mass Production

Stable supply coordination for production preparation, batch delivery and long-term purchasing needs.

Experienced Team

Over 15 years of channel management, quality control, sales management and organization management experience.

2864273 MINI MCR-SL-PT100-UI-NC Technical Information

  • Specifications
  • FAQ
  • Hot Sale
  • Related Products

Specifications

Product Attributes
Attribute Value
Manufacturer:
CHINA
Series:
MINI Analog
Packaging:
Individual, 1 pc
Product Status:
Active / Made to Order
Amplifier Type:
Isolated Temperature Transmitter / Signal Conditioner
Voltage - Supply:
19.2 VDC ~ 30 VDC
Output Type:
Voltage / Current
Current - Supply:
< 21 mA @ 24 VDC
Operating Temperature:
-20°C ~ +65°C
Mounting Type:
DIN Rail Mount

FAQ

1. How to order 2864273 MINI MCR-SL-PT100-UI-NC on Flychip?

You can submit an RFQ directly on this page. Our sales team will review your quantity, delivery requirements and target price, then reply with a quotation as soon as possible.

2. How does Flychip verify the quality of 2864273 MINI MCR-SL-PT100-UI-NC?

We work with qualified channels including international chip manufacturers and well-known distributors. Our team pays close attention to supplier review, traceability, product condition and quality control.

3. Are the price and inventory of 2864273 MINI MCR-SL-PT100-UI-NC updated in real time?

Inventory and prices of electronic components may fluctuate frequently. The displayed data is for reference, and the final quotation will be confirmed by our sales team.

4. What payment methods are accepted?

Wire Transfer, PayPal, Alipay, WeChat, Credit Card, Western Union, MoneyGram and Escrow may be supported depending on the order and region.

5. How is shipping arranged?

We can arrange international shipping through DHL, UPS, FedEx, TNT and other logistics channels. Tracking information will be provided after shipment.

6. What is the return or replacement process for 2864273 MINI MCR-SL-PT100-UI-NC?

Please contact our sales team within the specified period if there are quantity differences, wrong items, or clear external defects. The product should remain unused and in its original packaging.

7. Can I request technical support for 2864273 MINI MCR-SL-PT100-UI-NC?

Yes. You can contact us for datasheet, package details, pin information and sourcing assistance related to 2864273 MINI MCR-SL-PT100-UI-NC.

Related Products

SEN-13879 SparkFun Electronics
SEN-13879

SparkFun Electronics

GA-311 Panasonic Industrial Automation Sales
GA-311

Panasonic Industrial Automation Sales

E32-T11N 2M Omron Automation and Safety
E32-T11N 2M

Omron Automation and Safety

FX-501P Panasonic Industrial Automation Sales
FX-501P

Panasonic Industrial Automation Sales

FX-501 Panasonic Industrial Automation Sales
FX-501

Panasonic Industrial Automation Sales

E3X-HD44 Omron Automation and Safety
E3X-HD44

Omron Automation and Safety

E3X-HD41 2M Omron Automation and Safety
E3X-HD41 2M

Omron Automation and Safety

FX-502 Panasonic Industrial Automation Sales
FX-502

Panasonic Industrial Automation Sales

ASTC0000 Red Lion Controls
ASTC0000

Red Lion Controls

E3X-HD11 2M Omron Automation and Safety
E3X-HD11 2M

Omron Automation and Safety

E3NX-MA11 Omron Automation and Safety
E3NX-MA11

Omron Automation and Safety

ESPICO-ALL PalmSens BV
ESPICO-ALL

PalmSens BV

2864273 MINI MCR-SL-PT100-UI-NC Sourcing & Technical Support

2864273 MINI MCR-SL-PT100-UI-NC is supplied by CHINA. This page provides key purchasing information including manufacturer, package, datasheet, stock reference, price reference and RFQ support.

As your reliable partner for semiconductor solutions, Flychip supports customers from research and development to mass production with electronic component supply, BOM sourcing, PCB, SMT and PCBA solutions.

Our sourcing partners include international chip manufacturers and well-known distributors. With rich experience in channel management, quality control and sales management, Flychip helps customers accelerate product development and delivery.

Part Number
2864273 MINI MCR-SL-PT100-UI-NC
Manufacturer
CHINA
Package
Category
Sensor, Transducer Amplifiers

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
Submitting...
Please wait while we submit your inquiry.

Tips

Please check your information and try again.

Submit BOM or RFQ Phone
+8615914913027
Email
irene@ic-flychip.net
WhatsApp
Flychip WhatsApp QR Code

Scan QR Code

Back to top